Ape measurement
Hacksaw
* Two pliers
1. Install storm doors using a screw into the top of the hinge. After that, remove the hinge rail.
Step 2: Put the door together. To do so, get the hinge rail and the screwdriver, then drive that rail all the way to the door. Install the door sweep, get onto the cap for the extender, and then slide it onto.
Step 3: Get your newly-assembled door and place it onto the placeholder screws. Then tighten the screws using the screw driver.
Step 4: Using the drill bits, drive the screws onto the hinge rails to get them to tighten further. In the door sill, place the cap on the rail and then secure the back end of the rail on the edge.
5. The following step is to install the drip cap as well as latch rail. Attach the drip cap to the hinge rail by placing it in a straight line along its edges. The drip cap is now ready to install your latch rail tightly with screws.
Step 6: Purchase your drill bit , and then drill holes to make the latch.
Step 7: Screw your lock’s body into the mortise, then screw it in.
Step 8: Attach closers, place the handles and make space for the deadbolt. ddju18u6lb.